|
Do it yourself
| |||
| ||||
How to Remove Glow Plugs Without Breaking Them
Model: BMW BMW Various
Video tutorial
This video shows how to remove glow plugs from a BMW N47 engine without breaking them. We know how problematic it can be if a glow plug breaks inside the cylinder. Spray WD-40 on the glow plugs while the engine is warm and repeat this for a few days before the intervention. Locate the electrical connectors; if necessary, remove the intake connector for better access. Use a long 10 mm socket. It is important never to force it. If you feel resistance, stop and spray more WD-40: proceed with small alternating movements to loosen the buildup. The secret is to be patient and gentle: glow plugs only break if you rush or use too much force. When installing the new ones, apply some anti-seize on the threads and do not exceed the torque (usually under 20 Nm).
Posted on 27 September 2026 by ScegliAuto
Related tutorials
BMW BMW Various
Want to change the front tyre of your BMW R1250 GS yourself but don't know how? Here's how to remove this wheel. First, lift the bike with a jack aft…
BMW BMW Various
Replacing the timing chain on a car engine is a rather complex operation. If the engine is already dismantled, the task will be simpler. Follow the k…
BMW BMW Various
If you want to proceed with removing the antenna from a BMW vehicle, follow the instructions below and refer to the tutorial video. This vehicle has …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris
These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |