Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove an Antenna from a BMW

Model: BMW BMW Various
Part: Antenna

Video tutorial

If you want to proceed with removing the antenna from a BMW vehicle, follow the instructions below and refer to the tutorial video. This vehicle has a shark fin type antenna.

First, protect the bodywork around the antenna with masking tape to avoid damaging the paint. Get a utility knife and gently start to detach the adhesive under the antenna.

Then, take a plastic lever and begin to lift the antenna until it completely separates from the bodywork. Under the cover, you will find the base of the antenna, which is secured to the bodywork with a screw.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Remove a Shark Fin Antenna from the Roof of a BMW
How to Remove a Shark Fin Antenna from the Roof of a BMW
BMW BMW Various Removing a shark fin antenna from a BMW is a delicate but feasible operation; it is important to act with patience and the right tools to avoid scrat…
How to Remove the Instrument Cluster from a BMW Z1
How to Remove the Instrument Cluster from a BMW Z1
BMW BMW Various Below are the instructions that will allow you to remove and replace the instrument cluster of the BMW Z1. First, get into the vehicle and start unsc…
How to Remove and Clean the EGR Valve in a BMW?
How to Remove and Clean the EGR Valve in a BMW?
BMW BMW Various This tutorial demonstrates how to remove and clean the EGR valve in BMWs equipped with M47 and M57 engines, a very simple operation. First, ensure th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos