Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble and clean the EGR valve in a BMW?

Model: BMW BMW Various
Part: EGR valve

In this tutorial we can see how to disassemble and clean the EGR valve in BMWs equipped with M47 and M57 engines, a very simple operation. First of all, make sure that the engine is sufficiently cold, then open the hood and remove both plastic covers. Next, locate the valve in question, disconnect the rubber manifold connected to it, and, using a 10mm socket wrench, unscrew the four fixing bolts. At this point, we can remove the valve from the housing, clean it using the appropriate products, and reassemble it following the reverse procedure.

Posted on 4 May 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW BMW Various In this video we can see how to install the tire pressure sensor on a BMW car: to tell the truth, this method is valid for all cars, so it is applica…
BMW BMW Various Before you can start, you need to remove the injectors from your BMW. Begin by pouring a mixture of water and degreaser into an ultrasonic cleaning t…
BMW BMW Various Disassembly of the BMW timing chain, useful instructions. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos