Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Front Fender

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

If you need to remove the front fender, start by lifting the vehicle on appropriate jack stands and removing the front wheel. Next, remove the wheel well liner by disengaging the clips (press the pins inside) and the mounting screws.

Once the wheel well liner is removed, locate the fender mounting bolts on both the door side and the bumper side. Open the door to access the bolts that secure the fender to the pillar, and then open the hood to unscrew the bolts along the closure line, right on the edge of the fender.

Finally, disengage the side marker light and complete the removal by taking off the fender.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) Before proceeding with the removal of the front fender, it is advisable to protect the front edge of the door and the rocker panel with masking tape …
BMW Serie 5 (2003-2010 / E60, E61) First, lift the rear of the car with a jack and remove the rear wheel corresponding to the plastic inner liner of the fender to be removed. At this p…
BMW Serie 5 (1995-2003 / E39) To replace the bulb of the side turn signal, you need to remove the light from the fender; the procedure is very simple since the light is secured to…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos