Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Fender

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Body

See other generations:
Video tutorial

Before proceeding with the removal of the front fender, it is advisable to protect the front edge of the door and the rocker panel with masking tape to prevent scratches during the removal process. Lift the vehicle on a jack stand and remove the front wheel, then proceed to remove the wheel well liner secured with screws and plastic push clips.

At this point, open the door just enough to access the fender mounting pins, then remove those along the hood closing line, the one at the fender edge, and the one near the rocker panel.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2003-2010 / E60, E61) If you need to remove the front fender, start by lifting the vehicle on appropriate jack stands and removing the front wheel. Next, remove the wheel …
BMW Serie 5 (1995-2003 / E39) The front hood of the car model in question is equipped with two locking mechanisms located at the front of the grille. To begin the removal process,…
BMW Serie 5 (2003-2010 / E60, E61) First, lift the rear of the car with a jack and remove the rear wheel corresponding to the plastic inner liner of the fender to be removed. At this p…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos