Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Rear Fender

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Body

First, lift the rear of the car with a jack and remove the rear wheel corresponding to the plastic inner liner of the fender to be removed. At this point, use a wrench to unscrew the bolts located inside the fender that hold the indicated piece in place. Now carefully remove and extract the plastic inner liner from inside the fender. Once this is done, you can proceed to fix the dent located on the fender itself. The car on which the maintenance operation is performed is a BMW 5 Series.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Fender
Removing the Front Fender
BMW Serie 5 (1995-2003 / E39) Before proceeding with the removal of the front fender, it is advisable to protect the front edge of the door and the rocker panel with masking tape …
Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
BMW Serie 5 (2003-2010 / E61, E60) If you need to remove the front fender, start by lifting the vehicle on appropriate jack stands and removing the front wheel. Next, remove the wheel …
Replacing the Side Turn Signal Bulb
Replacing the Side Turn Signal Bulb
BMW Serie 5 (1995-2003 / E39) To replace the bulb of the side turn signal, you need to remove the light from the fender; the procedure is very simple since the light is secured to…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos