Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X1
    4. : Brake system

BMW X1 - Brake system

Brake System BMW X1 (2015-2022 / f 48)

BMW X1 (2015-2022 / F48)
How to replace the rear brake pads on a BMW X1 F48.
Let's see how to replace the rear brake pads on a BMW X1 F48: we activate the installation mode by connecting the diagnostic tool to the EOBD port, turning on …Read all…
Posted on 28 November 2025 by ScegliAuto
Cigarette lighter (1) Airbag (1) Antenna (1) Car stereo (1) Roof rack bars (1) Battery (35) Transmission (1) Body (1) Key (28) Timing belt (4) Onboard computer (2) Checks and maintenance (18) Dashboard (2) Brake rotors (1) Rear bench seat (1) Headlight (1) Tail light (2) Diesel particulate filter (2) Air filter (2) Cabin air filter (10) Light bulb (4) Headlight bulb (8) Tail light bulb (4) Antifreeze coolant (1) Handle (2) Brake fluid (1) Clock (9) Door trim panel (7) Front bumper (7) Shift knob (1) Push button (2) Instrument cluster (2) Fuse box (20) Seat (6) Brake system (1) Oxygen sensor (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (23) (28) Tire pressure warning light (5) Service warning light (71) Fuel cap (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos