Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on a BMW X1 F48.

Model: BMW X1 F48 - Years 2015-2022
Part: Brake system

Let's see how to replace the rear brake pads on a BMW X1 F48: we activate the installation mode by connecting the diagnostic tool to the EOBD port, turning on the instrument panel, and then selecting the "brake service" position. We lift the car and remove the wheels, take off the retaining clip from the caliper, insert a flathead screwdriver between the old pad and the piston, pushing it inward. We unscrew the two screws that secure the caliper to its bracket, clean it with a wire brush, and inspect the condition of the disc. We install the new pads: the one without the spring goes on the outside, and the one with the spring goes on the inside. We place the caliper back over the new pads, tighten the screws, reattach the caliper retaining clip, replace the wear sensor by removing it from its housing, disconnecting the connector, connecting the new one, and securing the new sensor in place. We reassemble the wheel, deactivate the installation mode, and then pump the brake pedal until it becomes firm to reposition the pads.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the 2019 BMW X1 F48
Where to Find the OBD Port on the 2019 BMW X1 F48
BMW X1 (2015-2022 / F48) This guide will help you easily locate the OBD port on your BMW X1 F48. First, open the driver's side door and enter the cabin, ensuring the car is c…
Where to Find the Fuse Box of the BMW X1 F48
Where to Find the Fuse Box of the BMW X1 F48
BMW X1 (2015-2022 / F48) To access all the various fuses in your BMW X1 F48, follow the procedure described in this dedicated guide. First, enter the vehicle and ensure it is…
How to Replace the Battery in a BMW X1 F48
How to Replace the Battery in a BMW X1 F48
BMW X1 (2015-2022 / F48) In this video, see how to remove and replace the battery in a BMW X1 F48, second generation, by following these simple and quick steps. First, open t…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos