Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the brake pads on BMW X1 F48.

Model: BMW X1 F48 - Years 2015-2022
Part: Warning light – error code

Today we will see how to reset the brake pads on a BMW X1 F48. Let's start the reset procedure by turning on the car's ignition without starting the engine, then press and hold the button on the left of the speedometer until entering the reset menu as shown in the video. After that, go to the brake pads reset option (rear or front) and again press and hold the left button of the speedometer until the reset request, then release the button and hold it down one last time to confirm and perform the reset.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the brake wear indicator light on the BMW X1?
How do you reset the brake wear indicator light on the BMW X1?
BMW X1 (2015-2022 / F48) The brake wear indicator shown on the instrument panel of the BMW X1 can be reset by turning on the instrument panel, turning the key inside the igni…
How to Reset the Brake Pad Warning Light on BMW X1 F48
How to Reset the Brake Pad Warning Light on BMW X1 F48
BMW X1 (2015-2022 / F48) This video shows how to reset the brake pad warning light on the BMW X1 F48. The procedure requires no tools or software and takes little time to com…
How to Reset the Brake Wear Light on the BMW X1?
How to Reset the Brake Wear Light on the BMW X1?
BMW X1 (2015-2022 / F48) To reset the brake wear light on the BMW X1, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is on, press and hol…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos