Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Pad Warning Light on BMW X1 F48

Model: BMW X1 F48 - Years 2015-2022
Part: Warning light – error code

This video shows how to reset the brake pad warning light on the BMW X1 F48. The procedure requires no tools or software and takes little time to complete. Perform this procedure after replacing the brake pads. To reset the light, first, turn on the ignition. Then, press the button on the dashboard to scroll through the menu until you find the brake pad light. Once located, press and hold the button for about 5 seconds. When the reset message appears, release the button and press it again for about 8 seconds. After 8 seconds, the procedure will be complete, and you can restart the ignition.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the brake wear indicator light on the BMW X1?
How do you reset the brake wear indicator light on the BMW X1?
BMW X1 (2015-2022 / F48) The brake wear indicator shown on the instrument panel of the BMW X1 can be reset by turning on the instrument panel, turning the key inside the igni…
How to Reset the Brake Wear Light on the BMW X1?
How to Reset the Brake Wear Light on the BMW X1?
BMW X1 (2015-2022 / F48) To reset the brake wear light on the BMW X1, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is on, press and hol…
How to Reset the Brake Pad Warning Light on a BMW X1?
How to Reset the Brake Pad Warning Light on a BMW X1?
BMW X1 (2015-2022 / F48) In this tutorial, you will see how to reset the brake pad warning light on a BMW X1. This is a very simple operation that should be done only after c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos