Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : Ignition coil

BMW X3 - Ignition coil

Ignition Coil BMW X3 (2003-2010 / mk 1, e 83)

BMW X3 (2003-2010 / MK 1, E83)
Ignition Coil Replacement Instructions
First, perform this maintenance with the engine cold to avoid burns. Once you open the hood, remove the protective caps on the engine cover and unscrew the …Read all…
Posted on 22 February 2026 by ScegliAuto
Cigarette lighter (5) Speaker (1) Shocks (3) Car stereo (5) Battery (13) Ignition coil (1) Air vents (2) Bushings (1) Control arm (2) Transmission (5) Spark plugs (5) Glow plugs (2) Convertible top (1) Body (5) Glove compartment (5) Key (25) Trunk lock (1) Timing belt (3) V-belt (2) Air conditioner (1) Onboard computer (1) Checks and maintenance (25) Bearing (1) Differential (2) Brake rotors (2) Headlight (4) Tail light (7) Fog lights (2) Air filter (4) Cabin air filter (13) Diesel fuel filter (1) Parking brake (1) Grille (1) Accessory kit (5) Side marker bulb (2) Headlight bulb (11) Tail light bulb (8) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) Handle (8) Engine (3) Power window motor (2) Transmission fluid (5) Brake fluid (1) Engine oil (14) Clock (8) Door trim panel (14) Rear bumper (3) Brake pads (7) Fuel pump (1) Car door (2) Push button (2) Radiator (1) Wheel (1) Fuse box (41) Seat (4) Door lock (1) Suspension system (3) Side mirror (5) Warning light – error code (21) (22) Tire pressure warning light (4) Service warning light (60) Manufacturer emblem (2) Fuel cap (3) Windshield wipers (4) Cylinder head (2) Drivetrain (4) EGR valve (3) Blower motor (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos