Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. X3
  6. : Control arm

BMW X3 - Control arm

Control Arm BMW X3 (2003-2010 / mk 1, e 83)

BMW X3 (2003-2010 / MK 1, E83)
Replacing the Rear Suspension Control Arm

Replacing the lower suspension control arm is quite easy: it involves removing the respective mounting bolts. Here’s how to proceed in detail: Lift the …Read all…
Posted on 28 February 2026 by ScegliAuto
BMW X3 (2003-2010 / MK 1, E83)
Steering Rack Tie Rod End Replacement

To replace the tie rod end of the steering rack, lift the vehicle on a hydraulic lift and remove the front wheel; then start by loosening the lock nut on the …Read all…
Posted on 26 February 2026 by ScegliAuto

Cigarette lighter (5) Speaker (1) Shocks (3) Car stereo (5) Battery (13) Ignition coil (1) Air vents (2) Bushings (1) Control arm (2) Transmission (5) Spark plugs (5) Glow plugs (2) Convertible top (1) Body (5) Glove compartment (5) Key (25) Trunk lock (1) Timing belt (3) V-belt (2) Air conditioner (1) Onboard computer (1) Checks and maintenance (25) Bearing (1) Differential (2) Brake rotors (2) Headlight (4) Tail light (7) Fog lights (2) Air filter (4) Cabin air filter (13) Diesel fuel filter (1) Parking brake (1) Grille (1) Accessory kit (5) Side marker bulb (2) Headlight bulb (11) Tail light bulb (8) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) Handle (8) Engine (3) Power window motor (2) Transmission fluid (5) Brake fluid (1) Engine oil (14) Clock (8) Door trim panel (14) Rear bumper (3) Brake pads (7) Fuel pump (1) Car door (2) Push button (2) Radiator (1) Wheel (1) Fuse box (41) Seat (4) Door lock (1) Suspension system (3) Side mirror (5) Warning light – error code (21) (22) Tire pressure warning light (4) Service warning light (60) Manufacturer emblem (2) Fuel cap (3) Windshield wipers (4) Cylinder head (2) Drivetrain (4) EGR valve (3) Blower motor (1)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos