Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Suspension Control Arm

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Control arm

See other generations:
Video tutorial

Replacing the lower suspension control arm is quite easy: it involves removing the respective mounting bolts. Here’s how to proceed in detail: Lift the vehicle on a lift and remove the rear wheel to facilitate maneuvering (though this step can be skipped).

Unscrew and remove the bolt that secures the control arm to the hub support, then repeat the process on the other side to remove the bolt that secures the bushing of the arm to the subframe near the differential. Once the old arm is removed, shift the plastic cover and proceed in reverse for the installation of the new one, using a jack to support the suspension.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Front Wheel Hub Bearing Replacement
Front Wheel Hub Bearing Replacement
BMW X3 (2003-2010 / E83, MK 1) To perform this maintenance, position the vehicle on a lift and remove the front wheel, the complete brake caliper with its bracket, and the brake ro…
Replacing Rear Headlight Bulbs on BMW X3
Replacing Rear Headlight Bulbs on BMW X3
BMW X3 (2003-2010 / E83, MK 1) Are the rear headlight bulbs blown? Don’t worry, let’s see how to replace them on a BMW X3. Open the trunk by pressing the electric button. Locate th…
Replacing Car Suspensions
Replacing Car Suspensions
BMW X3 (2003-2010 / E83, MK 1) The following guide shows how to replace your car's suspensions yourself, with minimal knowledge and attention. Suspensions help absorb the stresses …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos