Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Buick Cascada - Key

Buick Cascada (2016-2019 / MK 1)
How to replace the key battery on Buick Cascada
If the remote control of your Buick Cascada (year 2016-2019) suddenly stopped working and you want to find out how to replace the battery located inside it, …read all…
Posted on 29 May 2023 by ScegliAuto
Buick Cascada (2016-2019 / MK 1)
How to change key battery on Buick Cascada
If we need to replace the remote control key battery of this car, we can proceed in the manner described in these instructions and we can also refer to the …read all…
Posted on 26 April 2023 by ScegliAuto
Buick Cascada (2016-2019 / MK 1)
How to program the flip key on Buick Cascada
The simplest method to program the flip key on the Buick Cascada. Simply get into the car, close the four doors and with the car off, take the key we will call …read all…
Posted on 6 September 2022 by ScegliAuto
Battery (2) Soft top (1) Key (3) Checks and maintenance (1) Cabin air filter (1) Oil filter (2) Door panel (1) Instrument cluster (1) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos