Do it yourself
| ||||
|
Buick Cascada - Video tutorial
Model: Buick Cascada
MK 1
- Years 2016-2019 As we can see in this tutorial, changing the battery of the Buick Cascada remote control is a very simple and fast operation. To do this, we will need a spare CR2032 type battery and a flat bladed screwdriver. First of all we extend the emergency key and remove the rear door by levering in the slot just released, then, using the screwdriver, we extract the old battery from the housing. Finally, insert the spare battery taking care to place it with the positive pole facing us and reposition the rear door.
Posted on 14 April 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |