Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Verano
    4. : Gear Shift Knob

Buick Verano - Gear Shift Knob

Buick Verano (2010-2017 / MK 1)
How to replace the gear shift knob of the 2014 Buick Verano
If the gear shift knob of your 2014 Buick Verano is now too old and shows signs of wear, then it's time to replace it. Below we will find out how to do this …read all…
Posted on 20 February 2024 by ScegliAuto
Buick Verano (2010-2017 / MK 1)
How do you replace the shift knob of a Buick Verano?
To replace the gear shift knob of the Buick Verano, you need to use an object to pry off the plastic cover located at the base of the gear shift lever. Once …read all…
Posted on 1 April 2023 by ScegliAuto
Buick Verano (2010-2017 / MK 1)
How to replace the Buick Verano automatic gear knob
Let's find out in this guide how to remove and replace the Buick Verano automatic gear knob, in simple and quick steps. First we get on board the car and begin …read all…
Posted on 7 May 2024 by ScegliAuto
Car stereo (1) Battery (2) Key (5) Checks and maintenance (1) Air filter (1) Cabin air filter (2) Headlight bulb (1) Engine oil (1) Brake pads (1) Gear Shift Knob (3) Instrument cluster (1) Fuse box (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos