Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Xts
    4. : Instrument cluster

Cadillac Xts - Instrument cluster

Cadillac Xts (2013-2019 / MK 1)
How to reset the oil change on a Cadillac XTS
In this video we can see how to reset the service light of the Cadillac XTS. We will have closed the car doors and turned on the instrument panel without …read all…
Posted on 22 April 2024 by ScegliAuto
Cadillac Xts (2013-2019 / MK 1)
How to lower the volume of the horn on the Cadillac XTs.
There is nothing more annoying than a car that honks too loudly or excessively from behind, making us jump in our seats. So let's also think about our own, …read all…
Posted on 31 May 2023 by ScegliAuto
Cadillac Xts (2013-2019 / MK 1)
What is active learning about tyres
Every time we proceed on a car to replace the tires or to invert the front with the rear we can see the activation of Time Learning Active. That is, when the …read all…
Posted on 13 April 2023 by ScegliAuto
Cadillac Xts (2013-2019 / MK 1)
How to reset the Cadillac XTS oil warning light
To be able to permanently eliminate the warning light relating to the change of engine oil from the panel of your Cadillac XTS, all you have to do is put into …read all…
Posted on 20 May 2022 by ScegliAuto
Car stereo (1) Battery (1) Key (3) Headlight (1) Air filter (2) Cabin air filter (2) Accessory Kit (2) Headlight bulb (3) Door panel (1) Brake pads (1) Instrument cluster (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos