Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Xts
    4. : Headlight bulb

Cadillac Xts - Headlight bulb

Cadillac Xts (2013-2019 / MK 1)
How to replace the front headlight bulb on the Cadillac XTS.
In this video tutorial we will see how to disassemble and replace the headlight bulb of the Cadillac XTS, in simple and quick steps. First, we open the engine …read all…
Posted on 30 May 2023 by ScegliAuto
Cadillac Xts (2013-2019 / MK 1)
Cadillac XTS headlight bulb replacement
Today we see in this guide the necessary instructions on how to remove and replace the headlight bulb of the Cadillac XTS. First of all, we open the bonnet of …read all…
Posted on 18 August 2022 by ScegliAuto
Cadillac Xts (2013-2019 / MK 1)
How to replace the headlight bulb on the Cadillac XTS?
In order to replace the headlight bulb of the Cadillac XTS you have to open the hood, so that you can access the components inside the engine compartment. In …read all…
Posted on 27 April 2024 by ScegliAuto
Car stereo (1) Battery (1) Key (3) Headlight (1) Air filter (2) Cabin air filter (2) Accessory Kit (2) Headlight bulb (3) Door panel (1) Brake pads (1) Instrument cluster (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos