Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Xts
    4. : Cadillac XTS headlight bulb replacement

Cadillac Xts - Video tutorial

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Headlight bulb
Operation: Cadillac XTS headlight bulb replacement

Today we see in this guide the necessary instructions on how to remove and replace the headlight bulb of the Cadillac XTS. First of all, we open the bonnet of our car and begin to remove the plastic cover that we find on the back of the light; then we go to unclip the metal clip and remove the whole bulb, then disconnecting its electrical connector, as shown in the video. At this point we are going to install the new light on the optical group, of the right type and having the same attack; let's make the connection and verify its operation!


Posted on 18 August 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos