Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. Xts
  6. : How to replace the front headlight bulb on the Cadillac XTS.

Cadillac Xts - Video tutorial

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Headlight bulb
Operation: How to replace the front headlight bulb on the Cadillac XTS.

In this video tutorial we will see how to disassemble and replace the headlight bulb of the Cadillac XTS, in simple and quick steps. First, we open the engine hood of our car and start unscrewing the fastening screws of the air filter box (if we need to replace the bulb on the right headlight), in order to remove it. Then, we remove the protective cover of the bulb and disconnect the electrical connector together with the control unit, as shown in the video. At this point, we replace the xenon bulb with the new one, with the same attachment!


Posted on 30 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos