Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Xts
    4. : How to replace the headlight on Cadillac Xts

Cadillac Xts - Video tutorial

Model: Cadillac Xts MK 1 - Years 2013-2019
Part: Headlight
Operation: How to replace the headlight on Cadillac Xts

If we want to proceed with the replacement of the front light unit on this car, we can find the indications in the instructions given below. First of all it is necessary to open the bonnet and remove the fixing screws of the front panel located above the grille. Then proceed to remove the panel under the mudguard and unscrew the screws located on the side of the headlight that we want to replace, to be able to extract the optical unit it is necessary to completely remove the front bumper, after which we can unscrew the screws of the headlight and pull it towards of itself to extract it. Then replace the group and finally reassemble all the components backwards.


Posted on 21 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos