Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight on a Cadillac CT4

Model: Cadillac Cts MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

To replace a headlight bulb on this vehicle, follow the instructions and procedure outlined below, and you can also watch the video. First, after raising the hood, remove the screws securing the plastic front panel located above the grille.

Then, disconnect the clips holding the inner fender to access the back of the headlight and proceed to remove the screws securing the headlight assembly above it. At this point, you can pull the headlight out towards you.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Bumper of the Cadillac CT4
Replacing the Front Bumper of the Cadillac CT4
Cadillac Cts (2008-2014 / MK 2) In this video tutorial, you will learn how to remove and replace the front bumper of the Cadillac CT4 in simple and quick steps. First, open the hood…
How to Replace the Headlight Bulb of the Cadillac CTS?
How to Replace the Headlight Bulb of the Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) To replace the headlight bulb of the Cadillac CTS, unscrew the screws that secure the inner cover of the wheel well corresponding to the bulb that ne…
How to Remove the Tail Light on a Cadillac CTS?
How to Remove the Tail Light on a Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) To remove the tail light on a Cadillac CTS, open the trunk to access the rivets securing the carpet near the light: once this is removed, you can acc…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos