Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. Cts
  6. : How to replace the front bumper grille of a Cadillac CTS.

Cadillac Cts - Video tutorial

Model: Cadillac Cts MK 2 - Years 2008-2014
Part: Grille
Operation: How to replace the front bumper grille of a Cadillac CTS.

In this video tutorial, we will see how to disassemble and replace the front bumper grille of the Cadillac CTS, following these simple steps. First, we open the engine hood and start removing the plastic partition above the bumper by removing the plastic clips. Then, we remove the additional clips of the bumper grille, as shown in the video. At this point, we remove the clips located on both sides of the front wheel arches, releasing the bumper on the sides. We remove the front bumper and then the grille, applying the reverse process for reassembly!


Posted on 16 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos