Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Bumper on the Cadillac Escalade

Model: Cadillac Escalade Gmtk2xl - Years 2015-2020
Part: Front bumper

This guide provides instructions for removing and replacing the front bumper on the Cadillac Escalade in simple steps. First, open the hood and start by removing all the plastic clips found on the top panel of the bumper; then unscrew the additional mounting screws located underneath and at the bottom of the bumper using a socket wrench, as shown in the video. At this point, remove the clips and screws located on both sides of the front wheel wells; gently detach the bumper from the sides until it is completely removed, applying the reverse procedure for reassembly!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cadillac Escalade (2015-2020 / Gmtk2xl) To replace the headlight bulb on a Cadillac Escalade, open the hood to access the bolts securing the front bumper. These screws are located at the to…
Cadillac Escalade (2021-2026 / Gmt1xx) If you are looking for the fuse box of your Cadillac Escalade Mk3 and haven't found it yet, read this guide carefully. Below, you will find all the n…
Cadillac Escalade (2007-2014 / Gmt900) This guide outlines the steps necessary to remove and replace the headlight of the Cadillac Escalade. First, raise the vehicle and remove the front w…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos