Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Cadillac XT6

Model: Cadillac Xt6 MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

Video tutorial

This guide briefly outlines the instructions for removing and replacing the front bumper of the Cadillac XT6. First, open the hood of your vehicle and start unscrewing the mounting screws located above the front bumper. Then, remove the front wheel well covers by unscrewing the additional mounting screws found on the sides, as shown in the video.

At this point, unscrew the screws located underneath the bumper to start detaching it from the sides until it is completely removed. Then, install the new bumper by applying the reverse procedure!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Install Ghost Lights on the Cadillac XT6
How to Install Ghost Lights on the Cadillac XT6
Cadillac Xt6 (2020-2026 / MK 1) To install welcome lights (also known as Ghost Lights) on the Cadillac XT6, this is a really nice accessory that can be installed at a relatively low…
How to Change the Color of the Cadillac XT6 Emblem
How to Change the Color of the Cadillac XT6 Emblem
Cadillac Xt6 (2020-2026 / MK 1) As shown in the video, you can change the manufacturer emblem on your Cadillac XT6 if it seems too colorful. First, wash your car thoroughly and cove…
How to Replace the Remote Battery for the Cadillac XT6?
How to Replace the Remote Battery for the Cadillac XT6?
Cadillac Xt6 (2020-2026 / MK 1) To replace the remote battery for the Cadillac XT6, remove the key from inside the device by detaching the plastic cover on the top. Once this is rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos