Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. Cts
  6. : How to replace the wheel of Cadillac Cts

Cadillac Cts - Video tutorial

Model: Cadillac Cts MK 1 - Years 2002-2007
Part: Wheel
Operation: How to replace the wheel of Cadillac Cts

To replace the wheel on the Cadillac Cts, we start by opening the trunk, remove the cap to remove the trunk floor, unscrew the wheel and tools lock, then remove the wheel and tools; now let's go to the wheel to change, loosen the bolts with the appropriate key, place the jack under the car, lift it up, unscrew the bolts and remove the wheel. Once the wheel has been removed, we put on the spare wheel, screw the bolts in by hand and lower the car; if we notice that the spare tire is flat, as in the video, we inflate it to bring it back to the right pressure; finally we remove the jack from under the car and tighten the cross bolts. Now we can put the tools and the spare tire back in the trunk.


Posted on 2 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos