Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for Cadillac CTS

Model: Cadillac Cts MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

This short video shows the diagram of how the fuses are arranged inside the Cadillac CTS MK2, which is the second model released of the Cadillac CTS, available in dealerships from 2008 to 2014. As we can see, there are no fuses inside the cabin because the fuse boxes are arranged differently than usual.

The first one, located in the engine compartment, has a similar position to those in other vehicles.

The second box, instead of being placed under the dashboard in the cabin, is located in the trunk, behind a panel.


Posted on 4 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tire Pressure Light on a Cadillac CTS
How to Reset the Tire Pressure Light on a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) This guide provides instructions on how to reset the tire pressure light on a Cadillac CTS. Before resetting the TPMS sensors, ensure all four tires …
How to Replace the Lambda Sensor on a Cadillac CTS?
How to Replace the Lambda Sensor on a Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) The lambda sensor on a Cadillac CTS is located underneath the car, between the exhaust outlet and the fuel tank. Therefore, lift the vehicle to acces…
How to Reset the Oil Light on a 2009 Cadillac CTS
How to Reset the Oil Light on a 2009 Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) In this new mini guide dedicated to your 2009 Cadillac CTS (second generation), you will find all the steps to manually reset the engine oil light. F…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos