Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lambda Sensor on a Cadillac CTS?

Model: Cadillac Cts MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oxygen sensor

See other generations:
Video tutorial

The lambda sensor on a Cadillac CTS is located underneath the car, between the exhaust outlet and the fuel tank. Therefore, lift the vehicle to access the underside.

Once the sensor is located, disconnect it from its housing to insert the new one. The new sensor must be properly connected to the terminals between the muffler and the tank; this way, you can start the car to check that everything functions correctly.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Fuse Diagram for Cadillac CTS
Fuse Diagram for Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) This short video shows the diagram of how the fuses are arranged inside the Cadillac CTS MK2, which is the second model released of the Cadillac CTS,…
How to Replace the Air Filter in a Cadillac CTS
How to Replace the Air Filter in a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) In today's video, you will see how to replace the air filter in a Cadillac CTS. First, open the passenger side glove compartment. Once done, locate t…
How to Replace the Cabin Fan in a Cadillac CTS
How to Replace the Cabin Fan in a Cadillac CTS
Cadillac Cts (2002-2007 / MK 1) To replace the cabin fan in a Cadillac CTS, first move the carpet directly under the glove compartment on the passenger side: once this carpet is rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos