Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Cts
    4. : Lambda sensor

Cadillac Cts - Lambda sensor

Cadillac Cts (2008-2014 / MK 2)
How do you replace the lambda sensor on a Cadillac CTS?
The Cadillac CTS lambda probe is positioned in the lower part of the car, in the part between the exhaust terminal and the fuel tank: it will therefore be …read all…
Posted on 1 December 2022 by ScegliAuto
Battery (4) Spark plugs (2) Key (6) -board computer (1) Checks and maintenance (2) Bearing (1) Headlight (1) Tail light (1) Air filter (7) Cabin air filter (3) Grille (1) Injectors (2) Light bulb (1) Headlight bulb (2) Engine oil (1) Door panel (1) Front bumper (1) Instrument cluster (2) Wheel (1) Fuse box (2) Lambda sensor (1) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windshield washer nozzle (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos