Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tire Pressure Light on a Cadillac CTS

Model: Cadillac Cts MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

This guide provides instructions on how to reset the tire pressure light on a Cadillac CTS. Before resetting the TPMS sensors, ensure all four tires are at the correct operating pressure. Then, get in the vehicle and turn on the ignition.

Next, access the tire pressure monitor using the selection button, and press and hold it to reset the yellow TPMS light, as shown in the video. Finally, check the pressures on the TPMS monitor.


Posted on 16 September 2026 by ScegliAuto


Related tutorials

Cadillac Cts (2008-2014 / MK 2) This short video shows the diagram of how the fuses are arranged inside the Cadillac CTS MK2, which is the second model released of the Cadillac CTS,…
Cadillac Cts (2008-2014 / MK 2) In this new mini guide dedicated to your 2009 Cadillac CTS (second generation), you will find all the steps to manually reset the engine oil light. F…
Cadillac Cts (2002-2007 / MK 1) Thanks to its simple and minimalistic design, replacing the key battery of the Cadillac CTS is quite straightforward and quick. Let's go through the …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos