Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Cadillac CTS?

Model: Cadillac Cts MK 3 - Years 2014-2019
Part: Headlight bulb

To replace the headlight bulb of the Cadillac CTS, unscrew the screws that secure the inner cover of the wheel well corresponding to the bulb that needs to be replaced. By removing this wheel well cover, you can disconnect the connector attached to the bulb, allowing you to pull the bulb from its housing and replace it with a new part. After replacing, insert the new bulb and connect it to the connector; after installation, reattach the wheel well cover with the appropriate screws.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tail Light on a Cadillac CTS?
How to Remove the Tail Light on a Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) To remove the tail light on a Cadillac CTS, open the trunk to access the rivets securing the carpet near the light: once this is removed, you can acc…
How to Replace a Headlight Bulb on a Cadillac CTS
How to Replace a Headlight Bulb on a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) If you need to replace the headlight bulb on this vehicle, you can find general instructions below and also use the tutorial video for assistance. Th…
How to Replace the Front Wheel Hub on a Cadillac CTS
How to Replace the Front Wheel Hub on a Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) In this guide, follow the main steps to remove and replace the front wheel hub or bearing on a Cadillac CTS. First, lift the vehicle and remove the f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos