Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Cadillac CTS

Model: Cadillac Cts MK 3 - Years 2014-2019
Part: Headlight bulb

If you need to replace the headlight bulb on this vehicle, you can find general instructions below and also use the tutorial video for assistance. The first step is to open the hood and remove the clips securing the upper part of the front grille and the bumper. Next, remove the clips securing the wheel well. Above the front grille, there are screws that need to be removed to detach and take off the bumper. This will give you access to the screws securing the headlight assembly, which you will need to unscrew. At this point, you can pull the headlight out towards yourself and proceed to replace the burnt bulb by removing the rear cover of the housing and then disconnecting the power connector. Replace the bulb, reconnect the connector, and then reverse the steps to reassemble all components.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Cadillac CTS?
How to Replace the Headlight Bulb of the Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) To replace the headlight bulb of the Cadillac CTS, unscrew the screws that secure the inner cover of the wheel well corresponding to the bulb that ne…
How to Remove the Tail Light on a Cadillac CTS?
How to Remove the Tail Light on a Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) To remove the tail light on a Cadillac CTS, open the trunk to access the rivets securing the carpet near the light: once this is removed, you can acc…
How to Change the Headlight on a Cadillac CT4
How to Change the Headlight on a Cadillac CT4
Cadillac Cts (2008-2014 / MK 2) To replace a headlight bulb on this vehicle, follow the instructions and procedure outlined below, and you can also watch the video. First, after rai…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos