Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Light on a Cadillac CTS?

Model: Cadillac Cts MK 3 - Years 2014-2019
Part: Tail light

To remove the tail light on a Cadillac CTS, open the trunk to access the rivets securing the carpet near the light: once this is removed, you can access the screws that secure the light assembly from the inside. After loosening these screws, you can pull the light out of its housing and disconnect the connectors at the back. These will need to be connected to the new light, which can then be inserted into its housing and secured with the appropriate screws.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bulb on a Cadillac CTS
How to Replace the Front Bulb on a Cadillac CTS
Cadillac Cts (2002-2007 / MK 1) In today's video, you will see how to replace the front headlights on a 2003 Cadillac CTS. Remove the rubber caps located on the bumper, both on the …
How to Reset the Tire Pressure Light on a Cadillac CTS
How to Reset the Tire Pressure Light on a Cadillac CTS
Cadillac Cts (2014-2019 / MK 3) This guide provides instructions on how to reset the tire pressure light on a Cadillac CTS. Before resetting the TPMS sensors, ensure all four tires …
How to Replace the Lambda Sensor on a Cadillac CTS?
How to Replace the Lambda Sensor on a Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) The lambda sensor on a Cadillac CTS is located underneath the car, between the exhaust outlet and the fuel tank. Therefore, lift the vehicle to acces…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos