Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Tail Light on a Cadillac XT5

Model: Cadillac Xt5 MK 1 - Years 2017-2024
Part: Tail light

If you intend to remove and replace the tail light on this vehicle model, the description below provides all the useful information and instructions for disassembly. First, you need to remove the fender trim to release the side of the rear bumper. Then open the trunk and proceed to unscrew the mounting screws for the light located on the inner side. After that, remove the light assembly by pulling it towards you, being careful to disconnect the rear power connector. Then take the new light and work in reverse to install all the components.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cadillac Xt5 (2017-2024 / MK 1) If you are looking for the fuse box of your Cadillac XT5 and have not been able to find it, don't worry because below you will find all the useful in…
Cadillac Xt5 (2017-2024 / MK 1) As shown in this tutorial, replacing the battery in the Cadillac XT5 remote is a very simple and quick operation. Before proceeding, obtain a replace…
Cadillac Xt5 (2017-2024 / MK 1) To replace the rear headlight bulb on the Cadillac XT5, detach the inner cover of the wheel well corresponding to the bulb to be replaced, so you can…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos