Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Xt5
    4. : How to disassemble the rear light of the Cadillac XT5.

Cadillac Xt5 - Video tutorial

Model: Cadillac Xt5 MK 1 - Years 2017-2024
Part: Tail light
Operation: How to disassemble the rear light of the Cadillac XT5.

In today's video tutorial, we will see how to disassemble and replace the rear light of the Cadillac XT5, following the instructions below. First, we open the rear hatch of the trunk and begin to release the frame of the side fender, using a thin lever; then we gently release the bumper on the sides, until it is completely removed, as shown in the video. At this point, we remove the rear light by disconnecting the electrical connector of the lights; we replace, if necessary, the bulbs or the entire light, applying the reverse process for reassembly!


Posted on 14 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos