Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. Xt5
  6. : How do you remove the exterior handle of the Cadillac XT5?

Cadillac Xt5 - Video tutorial

Model: Cadillac Xt5 MK 1 - Years 2017-2024
Part: Handle
Operation: How do you remove the exterior handle of the Cadillac XT5?

In order to remove the external handle of the Cadillac XT5 you need to open the door, so that you can loosen the screw located on its side, inside the hole corresponding to the handle. After this screw has been loosened, it will be possible to detach the lock from its seat and in this way it will also be possible to remove the handle itself. After the old handle has been removed, it will be necessary to insert the new one in its seat and then the lock can also be inserted, which must be fixed with a lateral screw in the door.


Posted on 3 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos