Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Escalade
    4. : 2021-2024 (Gmt1xx)

Cadillac Escalade Years 2021-2024 (Gmt1xx)

Cadillac Escalade (2021-2024 / Gmt1xx)
How to reset the oil light on the Cadillac Escalade
In this new mini guide dedicated to all of you who own a Cadillac Escalade (year 2021-2023), we will discover the steps you need to take to correctly complete …read all…
Posted on 26 March 2024 by ScegliAuto
Cadillac Escalade (2021-2024 / Gmt1xx)
Where is the fuse box of the Cadillac Escalade located?
If you are looking for the fuse box of your Cadillac Escalade Mk3 but haven't been able to find it yet, then you must read the following guide carefully. In …read all…
Posted on 17 May 2023 by ScegliAuto
Cadillac Escalade (2021-2024 / Gmt1xx)
How to replace the key battery in Cadillac Escalade
If the key of your new Cadillac Escalade (year 2021-2023) has stopped working due to a dead battery and you want to find out how to replace it, then you just …read all…
Posted on 17 April 2023 by ScegliAuto
Cadillac Escalade (2021-2024 / Gmt1xx)
How to reset the engine oil light in a Cadillac Escalade
The steps to carry out to reset the engine oil warning light in a Cadillac Escalade car are simple and short-lived. First, let's get on board the vehicle, make …read all…
Posted on 10 December 2022 by ScegliAuto
Shock absorbers (1) Battery (2) Key (6) -board computer (2) Checks and maintenance (2) Headlight (1) Cabin air filter (1) Grille (1) Headlight bulb (1) Engine oil (1) Front bumper (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos