Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Cadillac
  4. :
  5. Escalade
  6. : Checks and maintenance

Cadillac Escalade - Checks and maintenance

Cadillac Escalade (2007-2014 / Gmt900)
How do you replace the front ball joint of the Cadillac Escalade?

To replace the front ball joint of the Cadillac Escalade, you need to lift the car so that you can proceed to loosen the bolts that secure the corresponding …read all…
Posted on 6 April 2024 by ScegliAuto
Cadillac Escalade (2007-2014 / Gmt900)
How to reset the oil service on a Cadillac Escalade?

In this tutorial, we can see how to reset the oil service in the Cadillac Escalade, a very simple operation to be performed only after completing all the …read all…
Posted on 26 April 2023 by ScegliAuto

Shock absorbers (1) Battery (2) Key (6) -board computer (2) Checks and maintenance (2) Headlight (1) Cabin air filter (1) Grille (1) Headlight bulb (1) Engine oil (1) Front bumper (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos