Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Ball Joint on a Cadillac Escalade

Model: Cadillac Escalade Gmt900 - Years 2007-2014
Part: Checks and maintenance

To replace the front ball joint on a Cadillac Escalade, lift the vehicle so you can loosen the bolts securing the corresponding wheel. Remove the wheel, then loosen the bolts that attach the wheel hub to the steering knuckles. This will give you access to the ball joint located between the suspension components. By loosening the bolts that secure it in place, you can completely remove the old joint and install the new one, ensuring everything functions properly.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Cadillac Escalade
Where to Find the Fuse Box of the Cadillac Escalade
Cadillac Escalade (2021-2026 / Gmt1xx) If you are looking for the fuse box of your Cadillac Escalade Mk3 and haven't found it yet, read this guide carefully. Below, you will find all the n…
How to Change the Battery in the Cadillac Escalade Remote
How to Change the Battery in the Cadillac Escalade Remote
Cadillac Escalade (2015-2020 / Gmtk2xl) If you need to replace the battery inside your Cadillac Escalade remote but don't know how, just read the following guide and follow the described pr…
Location of the Fuse Boxes in the Cadillac Escalade
Location of the Fuse Boxes in the Cadillac Escalade
Cadillac Escalade (2015-2020 / Gmtk2xl) In this video tutorial, you can see where the fuse boxes are located on the Cadillac Escalade. The Cadillac Escalade has two fuse boxes: the first bo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos