Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a Cadillac Escalade?

Model: Cadillac Escalade Gmtk2xl - Years: 2015, 2016, 2017, 2018, 2019, 2020
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorber on a Cadillac Escalade, lift the vehicle so that the corresponding rear wheel is not in contact with the ground. At this point, remove the mounting bolts to take off the wheel and the corresponding inner fender cover.

Now, the bolts that secure the shock absorber at its top and bottom will be accessible. By removing the old shock absorber, you can install the new one, which should be securely fastened with the previously removed bolts.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Cadillac Escalade
Where to Find the Fuse Box of the Cadillac Escalade
Cadillac Escalade (2021-2026 / Gmt1xx) If you are looking for the fuse box of your Cadillac Escalade Mk3 and haven't found it yet, read this guide carefully. Below, you will find all the n…
How to Replace the Key Fob Battery for the Cadillac Escalade
Cadillac Escalade (2021-2026 / Gmt1xx) If the key fob for your new Cadillac Escalade (2021-2023) has stopped working due to a dead battery and you want to learn how to replace it, follow t…
How to Change the Battery in the Cadillac Escalade Remote
How to Change the Battery in the Cadillac Escalade Remote
Cadillac Escalade (2015-2020 / Gmtk2xl) If you need to replace the battery inside your Cadillac Escalade remote but don't know how, just read the following guide and follow the described pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos