Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Chevrolet Express
    4. : Checks and maintenance

Chevrolet Express - Checks and maintenance

Chevrolet Express (2003-2023 / MK 2)
How to reset the oil service in the Chevrolet Express van?
As we can see in this tutorial, resetting the oil service in the Chevrolet Express van is an extremely simple operation. Obviously, before proceeding we will …read all…
Posted on 25 May 2023 by ScegliAuto
Chevrolet Express (1996-2003 / MK 1)
Where is the washer fuse located in the Chevrolet Express van?
In the event that the windshield washers of our Chevrolet Express van suddenly stop working, we can first of all check the state of the relevant fuse whose …read all…
Posted on 25 December 2022 by ScegliAuto
Chevrolet Express (2003-2023 / MK 2)
How to reset the oil warning light in the Chevrolet City Express?
With this video we see that you can reset the oil service light with the do-it-yourself, without resorting to a mechanic. Before following the procedure, make …read all…
Posted on 14 November 2022 by ScegliAuto
Key (4) -board computer (1) Checks and maintenance (3) Headlight (2) Air filter (2) Headlight bulb (1) Rear light bulb (3) Handle (1) Engine oil (1) Front bumper (1) Instrument cluster (4) Fuse box (3) Outside rearview mirror (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos