Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which Fuse is for the Trunk Lock in the Chevrolet Impala?

Model: Chevrolet Impala MK 10 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

If the trunk lock in your Chevrolet Impala has suddenly stopped working, first check the status of the corresponding fuse, the location of which is shown in this video. As demonstrated, the fuse is located in the box inside the cabin, protected by the black plastic cover next to the battery.

It is labeled F66 and is the last one on the bottom right when facing the box. If it is blown, make sure to use a replacement with the same amperage and always work with the vehicle turned off.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How do you reset the tire pressure light on the Chevrolet Impala?
How do you reset the tire pressure light on the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) In order to reset the tire pressure warning light on the Chevrolet Impala, you need to inflate the tires until they reach the recommended pressure va…
How to Remove the Front Headlight of the Chevrolet Impala?
How to Remove the Front Headlight of the Chevrolet Impala?
Chevrolet Impala (2006-2016 / MK 9) To replace the front headlight of the Chevrolet Impala, open the hood to access the mounting components of the headlight at the top. Here, you will n…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos