Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Impala

Model: Chevrolet Impala MK 9 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

To replace the battery yourself on this vehicle, follow the instructions below. After opening the hood, locate the battery on the right side behind the headlight.

First, disconnect the negative terminal, then the positive terminal. Next, remove the nuts securing the upper bracket and unscrew the bolt holding the lower bracket.

This will allow you to remove the battery and replace it with a new one. Reconnect the positive terminal first, then the negative terminal, and reattach the lower bracket and upper crossmember.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Chevrolet Impala key fob.
How to replace the battery in the Chevrolet Impala key fob.
Chevrolet Impala (2014-2020 / MK 10) In the following guide, you will find a description of the steps you need to take to successfully replace the battery located inside the key of your …
How to Replace the Battery in the Chevrolet Impala?
How to Replace the Battery in the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) To replace the battery in the Chevrolet Impala, open the hood to access the components inside the engine bay: on the right side, immediately next to …
How to Replace the Key Battery for the Chevrolet Impala
How to Replace the Key Battery for the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) In this new guide for all Chevrolet Impala owners, follow the steps to correctly replace your car key battery. First, locate the small metal button a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos