Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front suspension of the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Suspension system

See other generations:
Video tutorial

Below are the instructions on how to disassemble the front suspension or shock absorbers of the Chevrolet Cruze. First, lift the car and start by removing the front wheel; open the hood and remove the upper nut of the suspension using a 24 mm socket wrench, as shown in the video.

Next, disconnect the suspension from the lower part, using an 18 mm wrench to unscrew the pin nut; remove the suspension and replace it with the new one, following the same procedure for the replacement of the second front suspension.


Posted on 27 July 2025 by ScegliAuto


Related tutorials

Chevrolet Cruze (2009-2015 / J300, MK 1) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…
Chevrolet Cruze (2009-2015 / J300, MK 1) This guide illustrates the steps to remove and replace the manual gear knob on the Chevrolet Cruze. First, get inside the vehicle and start rotating …
Chevrolet Cruze (2009-2015 / J300, MK 1) In this tutorial we can see how to replace the battery of the Chevrolet Cruze remote control, an extremely simple and quick operation. To do this, we…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos