Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Light on a Chevrolet Impala?

Model: Chevrolet Impala MK 9 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire light on a Chevrolet Impala, first access the tire pressure learning mode in one of two ways, depending on whether the car has the button on the right side of the dashboard as shown in the video. In the first case, press the button with the car icon until the tire message appears, then press the button with the checkmark.

The horn will honk twice to confirm that the mode is activated. Alternatively, press and hold the lock and unlock buttons on the remote simultaneously for 10 seconds.

Now, use the tool that allows you to reset the light, following the instructions provided directly on its display.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How do you reset the tire pressure light on the Chevrolet Impala?
How do you reset the tire pressure light on the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) In order to reset the tire pressure warning light on the Chevrolet Impala, you need to inflate the tires until they reach the recommended pressure va…
Replacing the Headlight Bulb of the Chevrolet Impala
Replacing the Headlight Bulb of the Chevrolet Impala
Chevrolet Impala (2014-2020 / MK 10) Today, we will go through the steps and instructions to remove and replace the low beam bulb of the Chevrolet Impala's headlight. First, open the hoo…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos