Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fuel Pump on a Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel pump

See other generations:
Video tutorial

How to remove the fuel pump from a Chevrolet Spark? First, remove the rear seat cushions to access the cover. Unscrew the securing screws of the metal cap using a socket wrench, then remove it from its seat, using absorbent paper around the perimeter to soak up any liquid leaks.

Unscrew the securing nut of the fuel pump, disconnect the power connectors and the fuel circulation hoses. Extract the floating fuel pump from its seat along with any attached parts.

Repair the damaged pump or replace it with a new one of the same size.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump on Spark
Removing the Fuel Pump on Spark
Chevrolet Spark (2009-2018 / ) Is the fuel pump damaged? Remove the fuel pump from the Spark and replace it. Remove the rear seat cushions to access the pump. Use a socket wrench t…
Removing the Fuel Pump on Chevrolet Spark
Removing the Fuel Pump on Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Removing the damaged fuel pump? Where is it located? Let's see how to remove the fuel pump on the Spark. Remove the rear seat cushions of the car. Un…
Replacement of the front headlight bulb of the Chevrolet Spark M400
Replacement of the front headlight bulb of the Chevrolet Spark M400
Chevrolet Spark (2016-2022 / M400) To change the front headlight bulb of the Chevrolet Spark in case it burns out, open the hood of the engine compartment and stand in front of the hea…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos