Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : How to disassemble the car radio of the Chevrolet Silverado Mk2

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Car stereo
Operation: How to disassemble the car radio of the Chevrolet Silverado Mk2

The guide shows how to remove the Chevrolet Silverado Mk2 car radio. The first operation to carry out is to remove the upper right corner of the panel placed under the steering column; remove the plastic mask placed around the car radio by levering the edge. At this point it is necessary to unscrew the six 7 mm fixing bolts and extract the air conditioning control module. Extract the car radio module simply by pulling it outwards. Disconnect the electrical cables before completely removing the car stereo. Measure the housing before buying a new car stereo.


Posted on 8 April 2024 by ScegliAuto



How to connect the smartphone to the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To connect your smartphone to the Chevrolet Silverado radio quickly and above all correctly, all you have to do is put into practice the instructions
How to replace the antenna of the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) Let's find out in this short and simple guide how to disassemble and replace the Chevrolet Silverado car radio antenna, following the instructions be
Where are the fuses located for the Chevrolet Silverado 2?
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene in a targeted and safe manner in ca

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos