Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Beat
    4. : How to change the battery on a Chevrolet Beat.

Chevrolet Beat - Video tutorial

Model: Chevrolet Beat MK 1 - Years 2010-2021
Part: Battery
Operation: How to change the battery on a Chevrolet Beat.

If the battery of our car is no longer efficient and we want to proceed with its replacement in a do-it-yourself mode, in the description below we will find all the necessary information and steps to carry out the replacement safely. After opening the engine hood, we will find the battery located on the left side. We need to have a wrench to unscrew the fixing nuts of the upper plate and then connect the negative pole first and then the positive one. In this way, we can then extract the battery from the compartment and replace it with the new one, then proceed to reconnect the positive pole first and then the negative one, and finally screw the fixing nuts of the upper plate.


Posted on 15 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos