Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Sail
    4. : How do you replace the handbrake cuff of the Chevrolet Sail?

Chevrolet Sail - Video tutorial

Model: Chevrolet Sail MK 3 - Years 2014-2023
Part: Hand brake
Operation: How do you replace the handbrake cuff of the Chevrolet Sail?

To replace the handbrake cover of the Chevrolet Sail, you need to use a lever to detach the clips at the base of the cover. Once the clips are removed, pull up the old cover, being careful of the plastic coating on the handbrake lever. After removing the old cover, you can insert the new one, making sure to attach the leather cover and the clips at the base, while being careful of the plastic-coated part of the lever.


Posted on 17 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos