Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shift Boot on the Chevrolet Sail?

Model: Chevrolet Sail MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Shifter boot

See other generations:
Video tutorial

Using a flat object, detach the plastic surrounding the shifter, lift it, and remove the connectors. Grasp the shift knob and pull it forcefully upward to detach it. The plastic base and the shift boot will come off, which you need to separate from all other components.

Keep these parts carefully as they are necessary to reassemble the shifter. Take the new boot and reconnect the various parts using appropriate adhesive for the material.

Finally, reposition the knob on top of the lever, reconnect the connectors, and snap the plastic base back into place.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Shift Boot on a Chevrolet Sail?
How to Replace the Shift Boot on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the shift boot on a Chevrolet Sail, pry at the base of the boot with a tool to release the clips located there. Once the retaining clips a…
How to Replace the Handbrake Boot on a Chevrolet Sail?
How to Replace the Handbrake Boot on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the handbrake boot on a Chevrolet Sail, use a tool to pry off the clips located at the base of the handbrake boot. Once the clips are remo…
How to Replace the Water Pump on a Chevrolet Sail?
Chevrolet Sail (2014-2023 / MK 3) To replace the water pump on a Chevrolet Sail, open the hood to access the components on the left side of the engine block. Once you locate the timin…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos